KitCar 306 Maxi II 1999

(KitCar_Peugeot_306_1999) Mod
KitCar 306 Maxi II 1999, skin 00
KitCar 306 Maxi II 1999, skin 00
KitCar 306 Maxi II 1999, skin 01
KitCar 306 Maxi II 1999, skin 02
KitCar 306 Maxi II 1999, skin 03

Peugeot 306 Maxi II

Group/Class A/7 Homologation number: A5510 (25/03 VK)
Years active 1997-1999 Homologation start: 1/7/1997
Homologation end: 31/12/2006
Engine
Type PSA XU10 J4RS, straight 4cyl, 4 stroke located front transverse
Capacity 1998 cc WRC: 1998cc
Bore x Stroke (mm) 86.0 x 86.0
Compression ratio 12.5:1
Output power - torgue 280 - 300 HP / 11000 rpm 27.0 kgm (265Nm) / 8900 rpm
Main bearings 5 of 56mm diameter connecting rod length between centers 160mm, big end bearing internal diameter 49mm
Materials block: thin wall cast iron cylinderhead: AS7 aluminium alloy
Cams/valves 2 overhead camshafts (DOHC), belt driven 4 valves/cyl. - 16 valves total. 34.7mm inlet valves diameter, 29.7mm exhaust valves diameter. 25.5o angle between inlet valves and vertical, 24o angle between exhaust valves and vertical. 2 coil springs per inlet and exhaust valve
Aspiration natural, Magneti Marelli AP10 multi point electronic fuel injection
1999+: Catalytic converter fitted
2000+: inlet restrictor fitted
Ignition Magneti Marelli AP10 mapped electronic
Cooling system watercooled
Lubrication system dry sump
Transmission
Type front wheel drive 6 speed ZF gearbox
Diffrential ratio 4.428/1 (62/14) and from 3.429/1 (48/14) to 5.666/1 (68/12) parallel helical gears limited slip front differential
Clutch dry triple disk, 215mm diameter
Chassis-body
Type steel monocoque chassis with roll-cage. 3 door hatchback steel bodyshell with extended wheel arches, Carbon fibre panels and a rear airofoil
Front suspension macpherson strut with lower wishbone, coil springs, telescopic gas shock absorbers and anti-roll bar
Rear suspension trailing arm with torsion bar, telescopic gas shock absorbers, anti-roll bar and passive rear wheel steering characteristics
Steering system power assisted rack and pinion
Brakes ventilated front disks with 262/278/304/328/332/355/365/380mm disk diameter and 4 or 6 or 8 or 12 piston calipers. Solid rear disks with 280mm disk diameter and 1 piston caliper, or solid rear disks with 247/266/278/304/330mm disk diameter and 2 piston calipers, or ventilated rear disks with 304/330mm disk diameter and 2 piston calipers, or ventilated rear disks with 247/266/278/304/330mm disk diameter and 4 piston calipers dual circuit with servo, adjustable ratio split front to rear
Dimensions
length: 3.995 m (157.3") width: 1.835 m (72.2") height: 1.330 m (52.4")
wheelbase: 2.580 m (101.6") front track: 1.647 m (64.8") rear track: 1.628 m (64.1")
Rims - tires 15" - 17" Michelin
Weight 960 kg, (2000+: 1000kg)
Weight/power 3.4 kg/HP
Fuel tank 60 lt

Setups

There are no setups for this car.

Sessions

This car has been used in 0 sessions.

Tyres

  • slicks rally (SR)

Specs

  • BHP: 302 bhp
  • Power Ratio: 3.18 kg/hp
  • Top Speed: 190 km/h
  • Torque: 267 Nm
  • Weight: 960 kg

About

Assetto Corsa Server Manager is free, open source software. We're really proud of it and we think it adds a lot of really exciting stuff to Assetto Corsa. It's improved the way we play and enjoy the game, and we hope that it has done for you too.

We have dedicated a lot of time towards the development of Server Manager, and it'd be great if you would consider supporting us. It helps us keep working on cool new features for Server Manager!

  • Rent a Server - always-online server hosting for Assetto Corsa - with Server Manager Premium (obviously!). We handle setup and updates so you can get on and race!
  • Go Premium - purchase Server Manager Premium. This is a one-off purchase. Server Manager Premium includes: Our new Custom Assetto Corsa Server, built from the ground up, Assetto Corsa Skill Ratings, our powerful Race Weekends feature, Driver Swaps, Multi-server support, Time Attack Events, Improved Live Timings, Lua Scripting Hooks and more! You will also receive premium versions of future Server Manager updates!